Finesse: MinyTop

The MinyTop combined treatment systems integrates screening and grit separation with the option of fat, oil & grease (FOG) removal, all within a single package unit. Waste water enters the screen section where gross solids are removed from the flow, washed, compacted and dewatered. Depending upon the solids’ properties, a volume reduction of around 40% dry solids can be achieved. The screened effluent then discharges to a hopper section where grit and sand settlement is induced. The grit is conveyed to a grit classifier and can be further washed prior to dewatering and disposal into a container.

Model Variants

The MINYTOP includes two variants, MINYTOP 2 and MINYTOP 3. MINYTOP 2 integrates two treatment sections, 1) screening and 2) grit / sand separation.
The MINYTOP 3 range incorporates the MINYTOP 2 sections plus a further treatment section for FOG removal.Both variants may be fitted with air diffusers to impart improved separation of attached organic matter from the grit and sand particles. With the MINYTOP 3, this will also enhance flotation and removal of FOG which can then be drawn off and disposed of into a separate container.
With air-agitation and screw classifier washing, grit and sand separation > 95 % removal of 0.20 – 0.25 mm (200 μm – 250 μm) grit particles is attainable.

MINYTOP systems are supplied for direct installation into prepared level ground. The screen section can be supplied with or without the option of a bypass rake screen. Continuous bagging systems are available to receive screenings and grit. This will abate odours and the screenings can be sealed without any personal contact.

For a larger capacities complete package inlet works solutions. Please see the TOP: Combined Screening Solutions

Finesse MinyTop